Graco Extend2Fit Convertible Car Seat

Can I use the Graco Extend2Fit car seat without the base?

Yes, the Graco Extend2Fit Convertible Car Seat can be used without the base. However, using the base provides additional stability and ease of installation.

How do I know if my car seat is installed correctly?

After installation, the car seat should not move more than 1 inch side-to-side or front-to-back at the belt path. If you are unsure about the installation, contact Graco customer service or a certified child passenger safety technician for assistance.

Is the Graco Extend2Fit car seat approved for use on airplanes?

Yes, the Graco Extend2Fit Convertible Car Seat is FAA-approved for use on aircraft. Follow the airline's guidelines for car seat use during the flight.

What should I do if my car seat is involved in a crash?

If your car seat has been involved in a moderate or severe crash, it should be replaced. Even if the car seat appears undamaged, it may have sustained internal damage that compromises its safety and effectiveness in protecting your child.

What are the weight limits for the Graco Extend2Fit Convertible Car Seat in rear-facing and forward-facing modes?

The rear-facing weight limit is 4-50 lb (1.8-22.5 kg), and the forward-facing weight limit is 22-65 lb (10-30 kg). It is recommended to keep your child rear-facing for as long as possible within the 50 lb weight limit for maximum safety.

How do I install the Graco Extend2Fit car seat in my vehicle?

For rear-facing installation, place the car seat on the vehicle seat facing the rear and secure it using the LATCH system or vehicle seat belt, ensuring minimal movement. For forward-facing installation, adjust the car seat to the forward-facing position and secure it using the LATCH system or vehicle seat belt, confirming it is firmly installed with minimal movement.