Ask AI
— answers from the official manualAnswers from the official manual.
Common questions
Common Questions
8 totalWhy isn't my EMS foot massager turning on?
The problem could be that there is no battery charge or the device was used in an environment with extreme temperatures outside of 15°C to 35°C. Charge the main unit if this is not already in range.
How do I increase the intensity on my massager?
Press the “+” button to increase the intensity level, starting at level 1 and gradually increasing as needed for comfort. (Page 2)
What happens if the stimulation stops suddenly?
The stimulation could be interrupted due to a low battery or the completion of a 15-minute session cycle after startup. Charge the unit afterward or press “+” button upon starting for verification.
Can I adjust the frequency setting on my EMS massager?
You can select different modes, which include various frequencies from 1-100 Hz and output up to a maximum of 35 mA, suitable for muscle work and circulation.
How should I set the EMS foot massager before first use?
First, remove packaging. Snap on the main unit to mat with an audible click. Place your bare feet on the mat without socks or pantyhoses and power on using “+” button; select mode by pressing “M”. Adjust intensity as needed from level 1 up.
What modes and intensity levels does the EMS system have?
There are 8 different modes (A-F) each offering up to 19 intensity levels. Use “M” for mode selection and “+/-” buttons for intensity adjustment. Start at level 1 in new modes.
Show 2 more questions
Full Manual
2 pages
EMS foot massager instruction manual
Mode
Intensity level
Main unit
Reduce intensity/ Power off
Mode selection
Increase intensity/ Power on
The device can be used for approximately 160 minutes after one hour of charging. To charge the device, connect the micro USB cable to a suitable USB charger. A red LED will indicate that the device is charging and when the light goes off, it indicates it is fully charged. Do not use the device whilst charging
Troubleshooting
|Problem|Possible reason|Solution| |---|---|---| |Not turning on|Battery has no charge|Charge the main unit| |Not turning on|Device used in low or high temperature environment|Use in ambient temperature between 15° and 35°C| |No stimulation|Device switched off or intensity set too low|Press "+" button to turn on device or increase intensity| |Stimulation is suddenly interrupted|Battery ran out of charge or the 15 minute cycle has ended.|Charge the main unit or press the "+" button to ensure the battery is charged.|
What is EMS?
Electrical muscle stimulation, also known as neuromuscular electrical stimulation, uses electrical impulse to induce multiple muscle contractions. The central nervous system contracts muscles; EMS has been proved to be an active muscle strengthening tool as well as a circulation booster.
What is the purpose of EMS?
Technical specifications
|Product name|EMS foot massager| |---|---| |Voltage|3.7V| |Usage|A-F (8 modes) 19 levels| |Frequency|1-100 Hz| |Working time|15 minutes| |Output|Maximum 35 mA| |Battery capacity|150 mAh|
Warning !
The device should not be used by pregnant women, women who have just given birth or people with medical electronic devices such as pacemakers, etc.
Instrucciones masajeador de pies EMS
Modo
Nivel de intensidad
Consola
Reducir intensidad/ Apagado
Selección de modo
Aumentar intensidad/ Encendido
El dispositivo puede utilizarse aproximadamente 160 minutos con una hora de carga. Para cargar el dispositivo, conectar el cable micro USB a cualquier cargador USB. Se encenderá una luz roja para indicar que está cargando. La luz se apagará automáticamente cuando la carga esté completa. No utilizar el aparato mientras se está cargando.
Resolución de averías
|Problem|Possible reason|Solution| |---|---|---| |No enciende|Sin batería|Cargar consola| |No enciende|Dispositivo usado en condiciones de mucho calor/frío|Usar con temperatura ambiente entre 15°C y 35°C| |No hay estimulación|El dispositivo se ha apagado o la intensidad es muy baja|Presionar la tecla “+” para encender el dispositivo o aumentar la intensidad| |Estimulación interrumpida inesperadamente|Se ha agotado la batería o se ha acabado el ciclo de 15 minutos|Cargar consola o presionar el botón “+” para ver si la batería está cargada|
Qué es EMS?
La Estimulación Muscular Eléctrica, también conocida como estimulación neuromuscular eléctrica, usa impulsos eléctricos para inducir contracciones musculares. El sistema nervioso central contrae los músculos; Se ha demostrado que la EMS es una herramienta para el fortalecimiento muscular así como para mejorar la circulación.
Para qué sirve la EMS?
Especificaciones técnicas
|Nombre producto|Masajeador de pies EMS| |---|---| |Voltaje|3.7V| |Uso|A-F (8 modos) 19 niveles| |Frequencia|1-100 Hz| |Tiempo funcionamiento|15 minutes| |Salida|Máximo 35 mA| |Capacidad batería|150 mAh|
¡AVISO!
El dispositivo no debe usarse por mujeres embarazadas, mujeres que acaban de dar a luz o personas con dispositivos médicos electrónicos tales como marcapasos, etc.