Ask AI
— answers from the official manualAnswers from the official manual.
Common questions
Common Questions
20 totalWhat is the operating class rating for this device?
This is a Class B digital device, which means it is designed to provide reasonable protection against harmful interference in residential installations. It has been tested and found to comply with Part 15 FCC limits for Class B devices. (Page 2)
What is the FCC ID for the Amazon Factory Remote module?
The FCC ID for the module is 2AEZR-HUI925. This identification must be visible and displayed on any end product or host device that incorporates this module. (Page 1)
What is the IC (Industry Canada) designation for this module?
The IC designation is 10244A-HUI925. This information must be displayed on the end product or host device incorporating this module. (Page 1)
Can the module's firmware be overwritten or modified?
No, the module is hard-coded and cannot be overwritten (read-only), which ensures full compliance with regulations. This means the firmware settings are permanent and cannot be changed by users. (Page 1)
What should I do if the device is causing interference with my radio or television?
Try reorienting or relocating the receiving antenna, increase the separation between the equipment and receiver, or connect the equipment into an outlet on a different circuit from the receiver. If problems persist, consult a dealer or experienced radio/TV technician for help. (Page 2)
Is there a separate user's manual available for this module?
No, there is no user's manual for this module since it is not sold to general end users directly and is designed only for incorporation into end products or host devices by Amazon Robotics LLC. For module details, refer to the engineering specification sheet instead. (Page 1)
Show 14 more questions
How can I determine if this device is causing radio interference?
Is this device compliant with FCC regulations?
What does the manual say about modifying or changing the device?
What compliance statement must appear on end products using this module?
Is there a user's manual available for the Amazon Factory Remote module?
What FCC and IC compliance information must be displayed on the end product?
What are the two conditions for operation according to FCC Rules?
Can I modify or make changes to the Amazon Factory Remote?
What classification has this equipment received from the FCC?
What should I do if the remote causes interference to my radio or TV?
Is the module's firmware upgradeable or can it be overwritten?
Where can I find detailed technical specifications for this module?
Is the compliance information required to be printed on the device itself?
What type of radio frequency emissions does this equipment generate?
Full Manual
2 pages
Amazon Robotics LLC Confidential 1
User’s Manual
Since this module is not sold to the general end users directly, and is designed, limited for use and incorporated into an end product or host device by the grantee (Amazon Robotics LLC), there is no user’s manual for the module.
Once incorporated into the end product or host device, the module is hard-coded and cannot be overwritten (read-only) thus full compliance is assured.
For details about the module, please refer to the engineering specification sheet of the module. End Product Labeling and Manual Requirements The following information must be visible and displayed on the end product or host device incorporating this module; “Contains FCC ID: 2AEZR-HUI925” “Contains IC: 10244A-HUI925” ”This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.”
“Le présent appareil est conforme à la partie 15 des règles de la FCC et CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.”
Note: If it is difficult to print the above statement on the end product or host device due to size, then the statement shall be printed in the end product/host device user’s manual.
The end product/host device user’s manual shall contain the following statement cautioning the user that; “Changes or modifications not expressly approved by Amazon Robotics, LLC could void the user’s authority to operate the equipment.”
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver.
Amazon Robotics LLC Confidential 2
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.