HP Laserjet M2727 Multifunction Printer
Ask AI
— answers from the official manualAnswers from the official manual.
Common questions
Common Questions
9 totalHow do I load documents for a two-sided copy from one-sided originals?
Load the documents face up into the document feeder input tray with the top of the page leading in. On the control panel, press 2-Sided, select Copy to 1 to 2 sided using arrow buttons, and then press Start Copy. (Page 4)
How do I copy pre-printed letterhead/forms?
Load documents into tray 2 with the top forward and front side down, facing downward into tray 2. On the control panel, press Paper, select size and type as needed using arrow buttons and OK. Press Start Copy to initiate job.
How can I adjust copy quality settings for a print job?
Press Quality on the control panel, use arrow keys to scroll through options, select preferred setting using arrow buttons and OK or directly press Start Copy to apply changes and start copying.
Can I copy both sides of a document with this printer?
Yes. Load documents face-up in the input tray and press 2-Sided on the control panel to select either Copy to 1 to 2 sided (for one-sided originals) or Copy to 2 to 2 sided (for two-sided originals). Follow prompts, then start copy job.
How do I perform a factory reset?
Press and hold the Power button for 10 seconds until the LED flashes red. This clears all settings, including network configuration and jobs in queue; re-configure network and pair devices after this operation.
What should I do if a paper jam occurs?
Press Paper Jam on the control panel. Follow the on-screen instructions to clear the jammed media from the appropriate path(s). Open service panels as needed following safety precautions in the manual.
Full Manual
9 pages
Copy using the automatic document feeder (ADF)
|How do I?|Steps to perform| |---|---| |Load originals using the automatic document feeder (ADF)
CAUTION: To prevent damage to the product, do not use an original that contains correction tape, correction fluid, paper clips, or staples. Also, do not load photographs, small originals, or fragile originals into the ADF. Use the flatbed glass to scan these items.|1 Insert the top-end of the stack of originals into the automatic document feeder input tray, with the media stack face-up and the first page to be copied on top of the stack.
2 Slide the stack into the ADF until it does not move any farther. Document loaded appears on the controlpanel display.
3 Adjust the media guides until they are snug against the media.
4 Press Start Copy on the product control panel to start copying.
|Document loaded| |---| |
Copy using the flatbed scanner
|How do I?|Steps to perform| |---|---| |Load originals in a flatbed scanner|1 Make sure that the automatic document feeder (ADF) contains no media. Lift the flatbed scanner cover.
2 Place the original document face-down on the flatbed scanner with the upper-left corner of the document at the corner indicated by the icon on the scanner.
3 Gently close the lid.
4 Press Start Copy on the product control panel to start copying.
|
Collate my copy job
|How do I?|Steps to perform| |---|---| |Change the copy-collation setting for the current job
|1 On the product control panel, press Collate.
2 Use the arrow buttons to select On and Off.
3 Press Start Copy to save the selection and immediately start the copy job, or press OK to save the selection without starting the job.
|On| |---| |
Copy on both sides (Duplex)
|How do I?|Steps to perform| |---|---| |Make two-sided copies from one-sided documents
|1 Load the documents to be copied into the document feeder input tray with the first page facing up, and with the top of the page leading into the document feeder.
2 On the product control panel, press 2-Sided.
3 Use the arrow buttons to select Copy to 1 to 2 sided, and then press OK.
4 Press Start Copy.
|Copy to 1 to 2 sided| |---| |
|How do I?|Steps to perform| |---|---| |Make two-sided copies from two-sided documents|1 Load the documents to be copied into the document feeder input tray with the first page facing up, and with the top of the page leading into the document feeder.
2 On the product control panel, press 2-Sided.
3 Use the arrow buttons to select Copy to 2 to 2 sided, and then press OK.
4 Press Start Copy.
|Copy to 2 to 2 sided| |---| |
Copy on special paper, labels, or transparencies
|How do I?|Steps to perform| |---|---| |Copy on special paper, labels, or transparencies|1 Load the documents to be copied into the document feeder input tray with the first page facing up, and with the top of the page leading into the document feeder.
2 Load the special media into tray 1.
3 On the product control panel, pressPaper.
4 Use the arrow buttons to select a media size, and then pressOK.
5 Use the arrow buttons to select a media type, and then pressOK.
6 PressStart Copy.
|Size| |---|
|Type|
|---| |
Copy on pre-printed letterhead or forms
|How do I?|Steps to perform| |---|---|
|Copy on pre-printed letterhead or forms|1 Load the documents to be copied into the document feeder input tray with the first page facing up, and with the top of the page leading into the document feeder.
2 Load the special media into tray 2. Load media with the top forward and the side to be printed on facing down.
3 On the product control panel, press Paper.
4 Use the arrow buttons to select a media size, and then press OK.
5 Use the arrow buttons to select a media type, and then press OK.
6 Press Start Copy.
Size
Type|
Make my copy look better
|How do I?|Steps to perform| |---|---| |Adjust the copy quality for the current job|1 On the product control panel, press Quality to see the current quality setting for the copy.
2 Use the arrow buttons to scroll through the quality setting options.
3 Select a setting, and then press Start Copy to save the selection and immediately start the copy job, or press OK to save the selection without starting the job.
|
Reduce or enlarge the image
|How do I?|Steps to perform| |---|---| |Reduce or enlarge copies for the current job|1 On the product control panel, press Reduce/Enlarge.
2 Select the size to which you would like to reduce or enlarge the copies in this job.
3 Press Start Copy to save the selection and immediately start the copy job, or press OK to save the selection without starting the job.
|