HP Laserjet Managed Mfp E52645
Printers · 17 Q&As

HP Laserjet Managed Mfp E52645

Ask AI

— answers from the official manual

Answers from the official manual.

Common questions

Common Questions

17 total
1

Where should I position the HP LaserJet Managed MFP E52645 printer?

Select a sturdy, well-ventilated, dust-free area, away from direct sunlight to position the printer. These environmental conditions help ensure proper operation and longevity of the device. (Page 2)

2

What is the operating temperature range for the HP LaserJet Managed MFP E52645?

The printer operates between 10°C (50°F) and 32.5°C (91°F). Operating outside this temperature range may affect printer performance. (Page 2)

3

How do I connect the power cable and turn on the HP LaserJet Managed MFP E52645?

Connect the power cable between the printer and a grounded AC outlet, then turn on the printer and wait for it to initialize. After initialization, set the language, date/time format, and time zone on the control panel. (Page 4)

4

What voltage requirements does the HP LaserJet Managed MFP E52645 need?

The printer uses either 100-127 Vac or 220-240 Vac and 50/60 Hz. Make sure your power source is adequate for the printer voltage rating, which is listed on the printer label. To prevent damage, use only the power cable provided with the printer. (Page 4)

5

When should I connect the USB cable during setup of the HP LaserJet Managed MFP E52645?

For Windows, do not connect the USB cable until prompted during the software installation step. For Mac, connect the USB cable immediately during the setup process. Note that cables are not included with the printer. (Page 6)

6

How do I enable the USB port on the HP LaserJet Managed MFP E52645?

The USB port is disabled by default and must be enabled from the printer control panel. Open the Settings menu, then select General > Enable Device USB > Enabled. (Page 6)

Show 11 more questions

Full Manual

8 pages
Page 1

1 HP LaserJet Managed MFP E52645 www.hp.com/videos/LaserJet www.hp.com/support/ljE52645mfp E52645dn Flow E52645c

En

Installation Guide

He

Page 2

2 Flow E52645c 29.1 kg 64.1 lb 674 mm 26.5 in 482 mm 19.0 in 750 mm 29.5 in

En

Select a sturdy, well-ventilated, dust-free area, away from direct sunlight to position the printer.

32.5°C

10°C

91°F

50°F

He

Page 3

3 1 1.1 1.2 2.1 2.2 2.3 2.4 2

/RuhpLsvxpGroruVlw

DphwFrqvhfwhwxuDoolv

Odfxv3UdhvhqwLqH[DIholv

IdflolvlvJudylgd

1XqfPdwwlvOdfxvQhfOhr

OreruwlvTxlvYlyhuudVdslhq

Frqglphqwxp,Qwhjhu

YhklfxodYhoHolwQrq

Hxlvprg'Xlphqwxp

6XvshqglvvhGuhulwOdfxvHw

HurvPdohvxdhuglhwPdxulv

HJHWYHOLWHƫLFLWXUIDXFLEXV

&XudelwxuQlvlPhwxvVdjlwwlv

YlwdhWruwruHwShoohqwhvtxh

FrqjxhWhooxv9Hvwlexoxp

OxfwxvEodqglwOruhpD

Hohphqwxp

/RuhpLsvxpGroruVl

DphwFrqvhfwhwxuDoolv

Odfxv3UdhvhqwLq H

IdflolvlvJudylgd

1XqfPd

Orer

F

 

/RuhpLsvxpGroruVlw

DphwFrqvhfwhwxuDoolv

Odfxv3UdhvhqwLqH[DIholv

IdflolvlvJudylgd

1XqfPdwwlvOdfxvQhfOhr

OreruwlvTxlvYlyhuudVdslhq

Frqglphqwxp,Qwhjhu

YhklfxodYhoHolwQrq

Hxlvprg'Xlphqwxp

6XvshqglvvhGuhulwOdfxvHw

HurvPdohvxdhuglhwPdxulv

HJHWYHOLWHƫLFLWXUIDXFLEXV

&XudelwxuQlvlPhwxvVdjlwwlv

YlwdhWruwruHwShoohqwhvtxh

FrqjxhWhooxv9Hvwlexoxp

OxfwxvEodqglwOruhpD

Hohphqwxp



En

1.1 Remove all tape. 1.2 Remove all packing material.

En

NOTE: The paper guides 2.2 might be locked before use and might not be adjustable.

He

He

1.2 1.1 2.2

Page 4

4 3 3.1 3.3 3.2

En

If you are connecting to a network, connect the network cable now. Caution: Do not connect the USB cable now. NOTE: The cables are not included with the printer.

En

Caution: Do not extend more than one paper tray at a time. Do not use paper tray as a step. Keep hands out of paper trays when closing. All trays must be closed when moving the printer. 3.1 Connect the power cable between the printer and a grounded AC outlet. 3.2 Turn on the printer, and then wait for it to initialize. 3.3 On the control panel, set the language, the date/time format, and the time zone. NOTE: For advanced configuration of network-connected printers, go to www.hp.com/support/ljE52645mfp CAUTION: Make sure your power source is adequate for the printer voltage rating. The voltage rating is on the printer label. The printer uses either 100-127 Vac or 220-240 Vac and 50/60 Hz. To prevent damage to the printer, use only the power cable that is provided with the printer.

En

He

He

He

3.3 3.2 3.1

Page 5

5 4 4.1 4.2 4.3 4.4 4.5 Flow E52645c

En

Some languages require installing a keyboard overlay. 4.1 Pull the keyboard out. 4.2 Peel at a sharp angle to remove the paper backing from the overlay. All labels should adhere to the clear sheet. 4.3 Align the top corners of the clear sheet to the corners of the esc and delete keys. 4.4 Support the keyboard from the bottom, and firmly press the labels in place. 4.5 Peel at a sharp angle to remove the clear sheet.

He

4.3 4.2 4.1 4.5 4.4

Page 6

6

En

The USB port is disabled by default and must be enabled from the printer control panel. Open the Settings menu, and then select General > Enable Device USB > Enabled. Windows: Do not connect the USB cable until prompted during the software installation in the next step. If the network cable was connected previously, proceed to the next section. Mac: Connect the USB cable now. NOTE: The cables are not included with the printer.

En

Download the software installation files. Method 1: Download HP Easy Start (Windows and macOS clients)
  • Go to 123.hp.com/laserjet and click Download.
  • Follow the onscreen instructions.
  • Method 2: Download from product support website (Windows clients and servers)
  • Go to the product support website:
  • www.hp.com/support/ljE52645mfp. Select Software and Drivers.
  • Download the software for your printer model and
  • operating system. NOTE: Windows - Driver - Product Installation Software for clients, Basic Drivers V3 and V4 for clients and servers.
  • Launch the software file from the folder where the file was
  • saved, and follow the on-screen instructions Method 3: IT managed setup (Windows only - clients and servers) Visit hp.com/go/upd to download and install the HP Universal Print Driver.

    He

    He

    Page 7

    7

    En

    For more information, go to www.hp.com/support/ljE52645mfp. Select the Help button on the printer control panel to access Help topics.

    En

    For information on firmware updates, advanced configuration using the Embedded Web Server, and remote and mobile printing using HP ePrint, go to www.hp.com/support/ljE52645mfp.

    He

    He

    Page 8

    Copyright and license © Copyright 2019 HP Development Company, L.P. Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Edition 1, 4/2019 Trademark Credits Windows®, Windows® XP, Windows Vista®, Windows® 7, Windows® 8, Windows® 10, and Windows Server® are trademarks of the Microsoft Group of companies. macOS is a trademark of Apple Inc., registered in the U.S. and other countries. AirPrint and the AirPrint logo are trademarks of Apple Inc. www.hp.com

    More from HP

    Similar Printers