HP Laserjet Pro 200 Color Mfp M276

What should I avoid touching when installing a new toner cartridge?

Do not touch the imaging drum on the bottom of the toner cartridge. Fingerprints on the imaging drum will negatively affect print quality. (Page 12)

How do I replace a toner cartridge in the HP LaserJet Pro 200 Color MFP M276?

Open the front cover, pull out the toner cartridge drawer, and lift the old cartridge straight up by its handle to remove it. Insert the new cartridge after gently rocking it back and forth to distribute the toner evenly, remove the plastic shield from the bottom, and pull the seal tape straight up from the left side. Close the cartridge drawer and front cover, and place the old cartridge in the new cartridge's packaging for recycling. (Pages 10-13)

How do I change the color print options in Windows for the HP LaserJet Pro 200 Color MFP M276?

From your software program, select the Print option, select the product, click Properties or Preferences, then click the Color tab. Choose Automatic for most color print jobs, or Manual to adjust color settings individually; HP recommends that only color graphics experts change manual color settings, as doing so may affect output. (Page 15)

How do I print a color document in grayscale on the HP LaserJet Pro 200 Color MFP M276?

In the printer Properties or Preferences dialog, click the Color tab and select the 'Print in Grayscale' option to print color documents using black and gray shades. This option is useful for documents intended to be photocopied or faxed, or to save color toner when printing drafts. (Page 15)

How do I clean the scanner glass on the HP LaserJet Pro 200 Color MFP M276?

Turn off the product using the power switch and unplug the power cord from the electrical outlet before cleaning. Use a soft cloth or sponge moistened with a non-abrasive glass cleaner to clean the scanner glass and white plastic backing, then dry with a soft chamois or fiber sponge to prevent spotting. (Page 14)

What cleaning chemicals should I avoid using on the scanner glass?

Do not use abrasives, acetone, benzene, ammonia, ethyl alcohol, or carbon tetrachloride on any part of the product as they can damage it. Also, never pour liquid directly onto the glass or platen, as liquid can seep inside and damage the product. (Page 14)