Shark Professional Upright Vacuum

How do I clean the brushroll?

Turn off and unplug the vacuum, then remove the floor nozzle from the vacuum body. Use scissors to carefully cut away any hair or debris wrapped around the brushroll, and wipe the brushroll with a damp cloth to remove any remaining dirt.

What safety precautions should I take when using this vacuum?

Do not leave the vacuum unattended when plugged in, do not use it outdoors or on wet surfaces, keep hair and loose clothing away from moving parts, do not operate in bare feet, and do not pick up hot objects, hard objects like glass or nails, or flammable materials. Always turn off all controls before plugging or unplugging the vacuum.

How do I assemble the Shark Professional Vacuum?

First, align the handle with the top of the vacuum body and insert it until it clicks into place. Next, insert the hose into the hose inlet and twist it clockwise to secure it. Finally, slide the floor nozzle into the base of the vacuum body and ensure it is firmly attached.

How do I empty and clean the dust cup?

Press the dust cup release button to detach the dust cup, then hold it over a trash receptacle and press the bottom release button to empty it. Rinse the dust cup with water and let it air dry completely before reattaching it to the vacuum.

What should I do if the vacuum has loss of suction?

First, check the dust cup to ensure it is not full. Then inspect the hose and wand for any blockages, and clean the filters as described in the maintenance section by rinsing them under cold water until the water runs clear and allowing them to air dry for at least 24 hours.

How do I clean the HEPA filter?

Remove the HEPA filter from the dust cup and rinse it under cold water until the water runs clear. Allow the filter to air dry completely for at least 24 hours before reinserting it into the dust cup.