Whirlpool Electric Dryer FAQs

Where is the thermal fuse located on my Whirlpool dryer?

On electric dryers, the thermal fuse is often located on the blower housing or near the heating element. To reach the fuse on some models, you can uninstall the appliance's rear panel or lower front access panel.

What should I do to prepare my Whirlpool dryer if I'm going on vacation or won't use it for an extended period?

Unplug the dryer or disconnect power, clean the lint screen, and for steam models only, turn off the water supply to the dryer. This will help prevent issues during the nonuse period.

How do I properly set up a new Whirlpool dryer after installation?

Complete the installation checklist which includes verifying all parts are installed, leveling the dryer, ensuring the vent is not crushed or kinked, wiping the drum interior with a damp cloth, plugging into a grounded outlet or connecting direct wire power, and setting the heat cycle for 20 minutes without selecting Air Only temperature. Then start the dryer to confirm proper operation.

Is water treatment recommended for my Whirlpool steam dryer?

If you live in a hard water area, use of a water softener is recommended to control the buildup of scale through the water system in the dryer. This helps maintain the dryer's steam features and longevity.

What are the model numbers for the Whirlpool Electric Dryer?

The Whirlpool Electric Dryer model numbers are WED94HEX, WED95HEX, WED97HEX, and WEL8HEB. These models offer similar features and specifications outlined in this manual.

What type of exhaust vent should I use for my Whirlpool dryer?

You must use a 4" (102 mm) heavy metal exhaust vent with clamps. Do not use plastic or metal foil vents, as they do not meet safety requirements for proper dryer operation.