Ask AI
— answers from the official manualAnswers from the official manual.
Common questions
Common Questions
38 totalWhat is the print speed of the Canon imageCLASS X MF1538C?
The MF1538C (C1538/1538C) achieves a print speed of 38 ppm for A4 and 40 ppm for LTR paper. This applies to both 1-sided and 2-sided printing. In the case of 2-sided printing, 1 page on the front side and 1 page on the back side are output as 1 sheet. (Page 20)
How long does the MF1538C take to warm up?
With Quick Startup mode ON, key operations can be performed on the touch panel display in 4 seconds or less, and copying can start in 12 seconds or less. With Quick Startup mode OFF, key operations are available in 75 seconds or less and copying can begin in 85 seconds or less. Recovery time from deep sleep mode with Eco recovery mode OFF is 10 seconds or less. (Page 19)
Is it safe to disassemble the laser scanner unit on the MF1538C?
No, you must never disassemble the laser scanner unit. Although the machine is classified as a Class 1 laser product overall, the laser scanner unit contains a Class 3B laser beam source that can cause eye injuries. No adjustment can be made to the laser scanner unit in the field. (Page 13)
What is the paper capacity of the MF1538C cassette and multi-purpose tray?
The cassette holds 640 sheets at 64 g/m² or 550 sheets at 75/80 g/m², while the Multi-Purpose Tray holds 100 sheets. Additional optional paper feeders (Paper Feeder PF-D1 and Cassette Feeding Unit-AV1) can be installed, supporting up to 3 additional units of 550 sheets each. (Page 20)
What should I do if toner gets on my skin or clothes?
Use dry tissue paper to wipe off toner adhered to skin or clothes, then wash with water. Never use warm water for cleaning up toner, as this can cause toner particles to gel and soak permanently into fibers. Also avoid contact between toner and vinyl polymers. (Page 14)
What are the safety precautions when using an extension cord with the MF1538C?
As a general rule, extension cords should not be used with this machine. If an extension cord must be used, use one rated for the local voltage or higher, untie any cord binding, and insert the power plug completely to ensure a firm connection. Do not plug multiple cords together into an extension cord, as this may cause a fire or electrical shock. (Page 14)
Show 32 more questions
What are the memory and storage specifications of the MF1538C?
What fax transmission speeds does the MF1538C support?
What precautions should be taken before servicing or disassembling the MF1538C?
What are the acceptable temperature and humidity ranges for operating the MF1538C?
How do I correctly install a toner cartridge in the MF1538C?
How do I restart the Setup Guide if I skipped settings during initial installation?
What is the correct procedure for turning OFF the main power on the MF1538C?
Can the Copy Card Reader-F1 and Copy Control Interface Kit-C1 be used together on the MF1538C?
How do I set up the fax telephone number and line type after installing the Super G3 FAX Board?
What should I do if the MF1538C displays a message prompting a version update?
What are the power supply requirements for the MF1538C?
What is the safe operating temperature and humidity range for the MF1538C?
How do I properly install the toner cartridge?
How do I properly turn off the main power before servicing?
How heavy is the MF1538C and how should it be moved safely?
How do I restart the Setup Guide if I skipped settings during initial configuration?
How many paper feeders can be stacked with the MF1538C?
What options cannot be used together with the Copy Card Reader-F1?
What should I do if the machine shows a message to update the version at startup?
What are the environmental requirements for installing the MF1538C?
How much space do I need around the MF1538C for proper operation?
What power supply specifications does the MF1538C require?
What is the maximum weight of the MF1538C and how should it be lifted?
Can I use both Copy Card Reader and MiCARD Attachment Kit together?
What steps are required to complete FAX setup with the Super G3 FAX Board?
How do I turn off the main power switch safely?
What should I do if condensation occurs after moving the MF1538C from a cold location?
How do I properly install a toner cartridge in the MF1538C?
What should I do after powering on the MF1538C for the first time?
What paper types and weights can be used in the MF1538C cassette?
What precautions should I take when the MF1538C is moved from a cold location to a warm location?
How do I set up the FAX function after installing the Super G3 FAX Board?
Full Manual
65 pages
Installation
Manual
imageCLASS XMf1538C
Canon
April 22, 2021 Rev. 2
Copyright © 2021 Canon Inc.
CANON imageCLASS X MF1538C Rev. 2 PRINTED IN U.S.A.
Important Notices Application This manual has been issued by Canon Inc. for qualified persons to learn technical theory, installation, maintenance, and repair of products. This manual covers all localities where the products are sold. For this reason, there may be information in this manual that does not apply to your locality. Following "Trademarks" and "Copyright" are not applicable if they are not supported by laws and regulations in the country or region that this document and products are used in. Corrections This manual may contain technical inaccuracies or typographical errors due to improvements or changes in products. When changes occur in applicable products or in the contents of this manual, Canon will release technical information as the need arises. In the event of major changes in the contents of this manual over a long or short period, Canon will issue a new edition of this manual. Trademarks The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Canon is under license. Mopria®, the Mopria® Logo and the Mopria® Alliance logo are registered trademarks and service marks of Mopria Alliance, Inc. in the United States and other countries. Unauthorized use is strictly prohibited. Apple, AppleTalk, Bonjour, iPad, iPhone, iPod touch, Mac, OS X and Safari are trademarks of Apple Inc. Microsoft, Windows, Windows Vista, Windows Server, Internet Explorer, Microsoft Edge, Excel and PowerPoint are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Google Cloud Print, Google Chrome and Android are either registered trademarks or trademarks of Google Inc. OCR Technology by I.R.I.S., copyright 1987-2015, All Rights Reserved. iHQC™ compression technology by I.R.I.S., copyright 2007-2015, All Rights Reserved. PDF-iHQC™, XPS-iHQC™ technology by I.R.I.S., copyright 2007-2015, All rights Reserved. Java is a registered trademark of Oracle and/or its affiliates. Adobe is a registered trademark of Adobe Systems Incorporated. Command WorkStation, EFI, Fiery, FreeForm, Spot-On, and WebTools are trademarks of Electronics For Imaging, Inc. and/or its wholly owned subsidiaries in the U.S. and/or certain other countries. TORX® is a registered trademark of Acument Intellectual Properties, LLC in the United States. Other product names and other names in this document are generally registered trademarks or trademarks of the companies. Important Notices
Copyright The copyright of this document belongs to Canon Inc. This document may not be copied, reproduced or translated into another language, in whole or in part, without the prior consent of Canon Inc. Copyright CANON INC. 2021 Caution Use of this manual should be strictly supervised to avoid disclosure of confidential information. Symbols The frequently-performed operations are described with symbols in this procedure. 1x 1x 1x Install Screw Packaged Item Remove Tighten Loosen 1x Connect Connector Disconnect Install Harness (Common for Guides and Clamps) Remove 1x 1x Connect Power Cord Disconnect Check visually Check the sound Check
Off
CleaningOn
Push Power Unused Parts 1x 1x Important Notices
Contents Safety Precautions...............................................................................................1 About Toner.........................................................................................................................................2 Points to Note at Installation................................................................................................................2 Checking the Installation Environment....................................................................................................2 Points to Note Before Servicing..............................................................................................................2 Essential Items to Be Performed Before Installation.................................................................................2 Points to Note When Turning ON/OFF the Main Power............................................................................3 Checking Installation Space...................................................................................................................3 illustrations........................................................................................................................................... 3
Copy Control Interface Kit-C1........................................................................................................... 42 Points to Note at Installation.................................................................................................................42 Checking the Contents........................................................................................................................ 42 Installation Outline Drawing................................................................................................................. 42 Installation Procedure..........................................................................................................................43 Super G3 FAX Board-AK1................................................................................................................ 47 Checking the Contents........................................................................................................................ 47 Installation Outline Drawing................................................................................................................. 47 Installation Procedure..........................................................................................................................48 Checking the Operation.......................................................................................................................58 Revision.............................................................................................................. 60 Contents ii
Safety Precautions About Toner.......................................... 2 Points to Note at Installation................. 2
About Toner Toner is a non-toxic material composed of plastic and small amount of pigment.
Caution:
Never throw toner in flames to avoid explosion. Points to Note at Installation Checking the Installation EnvironmentCaution:
Leaving the power plug connected for a long time in an environment having a lot of dust, moisture, or oily smoke will cause a fire. (Because dust accumulated in the surrounding area will absorb moisture and cause an insulation failure)Caution:
Hazardous area such as corners, edges, springs and other sharp sections may be remaining on products. Always be aware of the presence of hazardous area to avoid injury caused by contacting and/or striking those area, by not over- concentrating on service work. Essential Items to Be Performed Before InstallationWarning:
Points to Note When Turning ON/OFF the Main Power The following message is displayed.
Copier > Option > Fnc-Sw > Ver-Chng
Checking Installation SpaceCaution:
Product Lineup 1 Host Machine Options...........................5 Paper Feed Options..............................6
Host Machine Options
Telephone 6 Kit
Long cord Cool White Super G3 FAX Board-BK1 Copy Control Interface Kit-C1 Copy Card Reader-F1 Copy Card Reader Attachment-J1 MiCARD Attachment Kit-B1 No. Product Name Condition Reference 1 TELEPHONE 6 KIT Long cord Cool White The Fax Board must be installed first. “Handset” on page 17 2 MiCARD Attachment Kit-B1 Card Reader (sales company's option) is required. “MiCARD Attachment Kit-B1” on page 28 3 Copy Card Reader-F1 Copy Card Reader Attachment-J1 Using with Copy Control Interface Kit-C1 is not available. “Copy Card Reader-F1 / Copy Card Reader Attachment-J1” on page 32 4 Copy Control Interface Kit-C1 Using with Copy Card Reader-F1 is not available. “Copy Control Interface Kit-C1” on page 42 5 Super G3 FAX Board-BK1“Super G3 FAX Board-AK1” on page 47 License Products At the time of installation, obtain the license number. Then, enter the obtained license number from the Control Panel of the machine. applicable functions are enabled. There is no physically required installation. No. Product Name Condition 1 Remote Fax Kit-A1
2 PCL Asian Font Set-A1
3 PCL International Font Set-A1
4 PS Printer KIT-CT1
5 Barcode Printing Kit-D1
6 Universal Send Trace & Smooth PDF Kit-A1
7 Universal Send Digital User Signature Kit-C1
8 Picture Login-A1
Paper Feed Options Paper Feeder PF-D1 Cassette Feeding Unit-AV1 No. Product Name Condition Reference 1 Paper Feeder PF-D1 A Paper Feeder with up to 2 cassettes can be installed. “Paper Feeder” on page 11 2 Cassette Feeding Unit-AV1 It is possible to install at the lowest deck. Up to 3 decks for the 2 decks of Paper Feeder and the Cassette Feeding Unit together can be installed. “Cassette Feeding Unit” on page 14
Host Machine 2 Checking before Installation..................8 Installation Procedure........................... 9
Checking before Installation Checking the Power Supply
Installation Procedure Unpacking
Loading Paper
Checking the Contents EUR only 1x 1x 1x 1x USA / Latin America only 1x With FAX installed model only 1x 1x < Others >
Note:
If no Option is installed, proceed with “Installing the Toner Cartridge (In case no Toner Cartridge is installed)” on page 19. ■ Paper Feeder ● Included Items 1x 1x
● Installation Procedure
Note:
You can stack up to 2 paper feeders.
Note:
● Installation Procedure
Note:
You can stack up to 2 Paper Feeders and a Cassette Feeding Unit with the host machine.
■ Handset ● Included Items 1x 2x 1x ● Installation Procedure
Note:
Insert the attached pin halfway. Do not insert it all the way in here.
Note:
Installing the Toner Cartridge (In case no Toner Cartridge is installed)
Note:
When installing the toner cartridge, each color should be set in the same way.Caution:
De not remove the Drum Protective Cover [A] in this step.[A]
Caution:
[A]
[B]
[C]
Caution:
[A]
[B]
[A]
Starting Setup Guide
Note:
For the detailed procedure, refer to the "Setup Guide". After installation of the host machine, Setup Guide is started at the time of first startup. Follow the instructions displayed on the Touch Panel Display to configure the settings of the host machine.Caution:
Note:
Register the information of paper loaded during installation of the host machine. Be sure to register the correct paper type. Especially in the case of special paper types such as heavy paper, registering a wrong paper type may result in image failure, soiled Fixing Assembly, or paper wraparound, requiring repair by a service technician. Informing the System Administrator That Installation Is Complete When the installation is completed, ask the system administrator to change the password. Also ask the system administrator to keep the changed password in a safeplace to prevent leakage. Registration of Installation Date InformationCaution:
Be sure that [Date/Time Settings] is completed. (There are items in Setup Guide.)Copier > Function > Install > Instdtst
Note:
Copier > Option > User > Instdt-Y
Copier > Option > User > Instdt-M
Copier > Option > User > Instdt-D
Copier > Option > User > Instdt-H
Copier > Option > User > Instdt-N
Host Machine Options 3 MiCARD Attachment Kit-B1................ 28 Copy Card Reader-F1 / Copy Card Reader Attachment-J1.....................32 Copy Control Interface Kit-C1............. 42 Super G3 FAX Board-AK1.................. 47
MiCARD Attachment Kit-B1 Points to Note at Installation
Installation Procedure
Copy Card Reader-F1 / Copy Card Reader Attachment-J1 Points to Note at Installation The Copy Card Reader Attachment is required for the installation of the equipment. The following options cannot be used in combination with this equipment.
Installation Outline Drawing Installation Procedure ■ Installing the Connector Unit
Caution:
Note:
[A]
[A]
Caution:
[A]
[A]
Caution:
[A]
1x
Note:
[Authentication Management] settings can be made only when logged in as an administrator.Copier > Option > Acc > Cr-Type
Copier > Option > Fnc-Sw > Card-Rng
Copier > Function > Install > Card
Starting from the entered card number, the number of cards set in step 5 can be used.Note:
Perform the following operations to change the number of cards (departments) after it has been set. In such a case, counter information for each department is reset.Copier > Function > Clear > Card
Copy Control Interface Kit-C1 Points to Note at Installation The following options cannot be used in combination with this equipment.
Installation Procedure
Caution:
Note:
[A]
[A]
Super G3 FAX Board-AK1 Checking the Contents 1x 1x 1x 1x 1x 2x 1x 1x TP; M3x6 7x 1x 1x < Others >
Installation Procedure ■ Installing the PCBs
Note:
Press down the cables not to come up the the 3 installed cables. ■ Installing the Speaker
Caution:
[A]
■ Installing the Covers
Note:
[A]
[A]
Note:
If the modular terminals of [EXT.] and [HAND SET] are not used, install the Dust Cover. Ask the user to keep the Dust Cover if it is not used.
Note:
Fax > Type > Type
Copier > Option > Dsply-Sw > Sdtm-Dsp
Note:
To change parameter to "0" makes no show below [Settings/Registration > Preferences > Time/Energy Settings > Auto Shutdown Time] and auto shut down is not available.
■ Basic Setting
Note:
Revision Rev . Chapter Category Product Name Reference Remarks 1.0
Revision 60