Name: Jbl Partybox 310mc Portable Party Speaker
Brand: Jbl

Question 1

What should I do if the speaker will not turn on?

Accepted Answer

Ensure that the speaker battery is not drained; if it is, connect AC power instead. Check that the power cord is properly connected and that you are using only the provided power cord. (Page 16)

Question 2

What should I do if the PartyBox 310 speaker won't turn on?

Accepted Answer

Ensure that the speaker battery is not drained; if it is, connect AC power instead of relying on the built-in battery. Check that the power cord is properly connected to the AC power supply. Use only the provided power cords when connecting to AC power. (Page 16)

Question 3

How do I connect my phone to the PartyBox 310 via Bluetooth?

Accepted Answer

Switch to the Bluetooth source, then press the Bluetooth button on the speaker to enter pairing mode. On your Bluetooth device, select 'JBL PARTYBOX 310' to connect. The Bluetooth range is approximately 10 m (33 ft), and if a PIN code is requested, enter '0000'. (Page 10)

Question 4

How long does the battery last and how long does it take to charge?

Accepted Answer

The battery play time is up to 18 hours, though this may vary depending on music content, battery aging, volume level, and whether the light show is on. The battery charge time is less than 3.5 hours. The 18-hour estimate is achievable with the light show switched off, volume at level 18, and a Bluetooth streaming source. (Page 15)

Question 5

What audio file formats are supported when playing music from a USB drive?

Accepted Answer

The PartyBox 310 supports MP3, WMA, and WAV (.wave) file formats from a USB storage device. The USB storage device must be formatted as FAT16 or FAT32. The speaker plays audio files from the root folder to the last level of subfolders in alphabetical sequence, supporting up to 8 levels of subfolders. (Page 10, 15)

Question 6

What does the flashing red LED indicator mean on the PartyBox 310?

Accepted Answer

A quickly flashing red LED indicates that the battery is low. You can check the battery level at any time by pressing any button on the speaker. It is recommended to fully charge the speaker before first-time use to prolong the lifespan of the built-in battery. (Page 7, 9)

Question 7

What is the maximum output power and what are the speaker driver specs of the PartyBox 310?

Accepted Answer

The PartyBox 310 delivers 240 W RMS when AC powered, 140 W RMS when battery powered, and 140 W RMS when car powered. The speaker drivers consist of 2 x 6.5 inch (176 mm) woofers and 2 x 2.5 inch (65 mm) tweeters. The frequency response is 45 Hz to 20 kHz (-6 dB). (Page 15)

Question 8

Why are some buttons on my PartyBox 310 not responding?

Accepted Answer

The product may be in demo mode, which disables all input sources and buttons except for the power, volume, and a few others. To exit demo mode, hold the power button and the input source button simultaneously for more than 5 seconds. Never attempt to repair the product yourself; contact service if problems persist after troubleshooting. (Page 16)

Question 9

How do I connect two PartyBox 310 speakers together in TWS mode?

Accepted Answer

Press the TWS button on both speakers to connect them to each other in True Wireless Stereo mode. By default, the speaker connected to your Bluetooth device acts as the primary speaker (left channel), while the other acts as the secondary speaker (right channel). To exit TWS mode, power off or press the TWS button on either speaker. (Page 14)

Question 10

What audio file formats does the PartyBox 310 support via USB?

Accepted Answer

The PartyBox 310 supports .mp3, .wma, and .wav audio file formats when using a USB storage device. The USB storage device must be formatted in FAT16 or FAT32. The speaker plays audio files from the root folder to the last level of subfolders in alphabetical sequence, with up to 8 levels of subfolders supported. (Page 10 & 15)

Question 11

What is the total output power of the PartyBox 310?

Accepted Answer

The PartyBox 310 delivers 240 W RMS when powered by AC, 140 W RMS when powered by the built-in battery, and 140 W RMS when powered by a car (DC) power supply. The speaker features 2 x 6.5 inch woofers and 2 x 2.5 inch tweeters. The frequency response is 45 Hz to 20 kHz (-6 dB). (Page 15)

Question 12

How do I fix the issue of some buttons not responding on the speaker?

Accepted Answer

The speaker may be in demo mode, which disables all input sources and buttons except for the power, volume, Bluetooth, and source buttons. To exit demo mode, hold the Power button and the Source button simultaneously for more than 5 seconds. (Page 16)

Question 13

Is the JBL PartyBox 310 waterproof, and what precautions should I take?

Accepted Answer

The PartyBox 310 is IPX4 splash resistant, meaning it can handle splashing water from any direction. Always keep the charging port dry before connecting AC power, and always keep the protective covers closed securely to ensure splash resistance. (Page 15)

Question 14

Can I use the speaker while it's charging?

Accepted Answer

Yes, the speaker can be used while charging. This allows you to enjoy music and the light show without waiting for a full charge to complete.

Question 15

What does the IPX4 splashproof rating mean?

Accepted Answer

The IPX4 rating means the speaker can withstand splashes of water but is not fully waterproof. It is suitable for outdoor use in wet conditions but should not be submerged.

Question 16

How do I connect multiple JBL PartyBox speakers together?

Accepted Answer

You can connect up to two compatible JBL PartyBox speakers using the True Wireless Stereo (TWS) feature for a more immersive sound experience.

Question 17

How do I connect two PartyBox 310 speakers in TWS (True Wireless Stereo) mode?

Accepted Answer

Press the TWS button on both speakers to connect them to each other in TWS mode. By default, the speaker connected to your Bluetooth device acts as the primary speaker (left channel), while the other acts as the secondary speaker (right channel). To exit TWS mode, power off or press the TWS button on either speaker. (Page 14)

Question 18

How do I connect a microphone or guitar to the PartyBox 310?

Accepted Answer

Connect a microphone to the microphone socket and switch the slider to the microphone position, or connect a guitar to the guitar socket and switch the slider to the guitar position. Always set the guitar or microphone volume to the minimum level before connecting or disconnecting, and always disconnect them when not in use. You can adjust the volume, gain, echo, treble, and bass levels using the dedicated knobs on the back panel. (Page 11-12)

Question 19

How do I reset the JBL PartyBox 310MC to factory settings?

Accepted Answer

Press and hold the power button and the Bluetooth button simultaneously for 10 seconds until the speaker powers off. Upon restarting, the speaker will be restored to its factory settings.

Question 20

What should I do if I'm experiencing Bluetooth pairing issues?

Accepted Answer

Ensure Bluetooth is enabled on both the speaker and your device. Restart both devices and attempt pairing again. If problems persist, clear the Bluetooth pairing list on the speaker if necessary.

Question 21

What does error code E3 mean on my speaker?

Accepted Answer

Error code E3 indicates a battery charging error. You should check your power connection and try charging again, or contact JBL customer service if the issue persists.

Question 22

How long does it take to fully charge the JBL PartyBox 310MC?

Accepted Answer

The battery charge time is less than 3.5 hours. After charging is complete, you can enjoy up to 18 hours of continuous playtime on a single charge.

Question 23

What should I do if there is no sound output from the speaker?

Accepted Answer

Ensure the speaker is powered on and the volume is turned up. Check the audio source to confirm it's playing correctly, and verify that the speaker is properly connected to the audio source.

Question 24

How do I update the firmware on my JBL PartyBox 310MC?

Accepted Answer

Firmware updates can be performed through the PartyBox app. Ensure your speaker is connected to the app, navigate to the settings menu, and follow the prompts to check for and install any available updates.

Question 25

What is the maximum Bluetooth range for this speaker?

Accepted Answer

The Bluetooth range is approximately 10 meters (33 feet), depending on environmental conditions and obstacles.

Jbl Partybox 310mc Portable Party Speaker

Ask AI

Common Questions

More from Jbl

Similar Speakers