Ask AI
— answers from the official manualAnswers from the official manual.
Common questions
Common Questions
10 totalWhy do my ice cubes taste bad or have an odor?
Bad taste or odor in ice cubes can come from three sources: a dirty ice storage bin, food items transmitting odors to the ice, or a dirty refrigerator interior. Empty and thoroughly wash the ice bin, cover or wrap food items to prevent odor spread, and refer to the refrigerator's Owner's Manual for interior cleaning instructions.
What is the safety warning for the automatic icemaker?
Avoid contact with the moving parts of the icemaker. Do not place fingers or hands on the automatic icemaking mechanism while the refrigerator is plugged in, as this creates a personal injury hazard. Additionally, ensure nothing interferes with the movement of the feeler arm during operation.
What should I do if ice cubes are freezing too slowly?
Check that refrigerator doors are closed properly, as leaving them open will slow ice freezing. Verify that the temperature control is set cold enough by referring to the refrigerator's Owner's Manual Control Panel Features section. The recommended freezer temperature is 0 degrees F (-18°C) for proper ice production.
Can I operate the refrigerator without connecting a water supply to the icemaker?
Yes, you can operate the refrigerator without connecting a water supply by setting the icemaker switch to O (off). However, when you do connect the refrigerator to a water supply, you must set the switch to I (on) to enable ice production. Remember to discard the first few batches of ice after connecting to clear the water line.
How long does it take for the ice maker to start producing ice after installation?
A newly installed refrigerator may take 12 to 24 hours to begin making ice cubes. This waiting period allows the freezer compartment to reach its proper temperature and the icemaker to fill with water. You should also discard the first few batches of ice to allow the water line to clear.
What should I do if the automatic icemaker is not working?
First, check that the icemaker switch is in the I (on) position, not O (off). Verify that the water supply is turned on and properly connected. Ensure the freezer compartment temperature is at the recommended 0 degrees F (-18°C) and wait 24 hours after installation if needed. If ice cubes are piled up in the storage bin, level them by hand as this can cause the icemaker to shut off.