Frigidaire FRSS2623AS Side-by-Side Refrigerator

What does error code E1 mean?

Error code E1 indicates that the freezer temperature is too high. This may mean the freezer compartment is not cooling to the desired temperature and should be investigated or serviced.

Why is my water dispenser not working?

First, confirm that the water supply is connected and turned on at the shutoff valve. If water still doesn't dispense, check if the water filter needs replacement, as a clogged filter can prevent water flow.

How often should I replace the water filter?

You should replace the water filter every six months or as needed to maintain proper water quality and dispenser function. A clogged or expired filter can affect both taste and water flow.

What is the total storage capacity of the Frss2623As?

The Frigidaire FRSS2623AS has a total capacity of 25.6 cubic feet, with 16.6 cubic feet in the fresh food compartment and 9 cubic feet in the freezer compartment. This provides ample storage space for most household needs.

How do I set up the water supply connection for my Frigidaire FRSS2623AS refrigerator?

Disconnect the refrigerator from power, place the end of the water supply line in a sink, and turn on the water to flush it until clear. After turning off the water supply at the shutoff valve, remove the cap from the water valve inlet and connect the water supply line following the specific instructions for copper tubing or braided stainless steel tubing, ensuring proper tightening (Page 12).

What should I do if my refrigerator stops cooling?

Ensure it is plugged in and the power switch is on. Check that the temperature settings are correctly adjusted and confirm that the doors are fully closed (Page 15).