Bosch Ascenta Models
Frequently Asked Questions (10)
How do I cancel a cycle that is already running?
Press and hold the Start button for 3 seconds to cancel a running cycle. Wait about 1 minute until the 'Clean' LED illuminates, indicating the dishwasher is done draining. Then press the On/Off button, and you may start a new cycle. (Page 13)
How do I activate the Child Lock feature?
After starting a cycle, press and hold the '<' button until the 'Child Lock' LED illuminates or 'CL' appears on the display. Once active, all buttons will stop functioning except the On/Off button. To deactivate, press and hold the '<' button again until the Child Lock LED turns off or 'CL' disappears. (Page 13)
Why are my dishes not drying properly?
The most common causes are an empty rinse aid dispenser, improper loading of dishes, or Extra Dry Heat not being activated. Make sure to always use a liquid rinse aid even if your detergent contains a drying additive, and ensure items are not nesting together. Note that plastic and Teflon items typically do not dry as well as other materials. (Page 16 and Page 11)
How do I use the Delay Start feature?
Press the On/Off button, select a cycle, then press the Delay Start button and release it when the desired delay time (3, 6, or 9 hours) is shown on the display or the appropriate LED is lit. Then press Start to begin the delayed cycle. (Page 13)
How do I clean the dishwasher's filter system?
Remove the bottom rack, then grasp the filter assembly and turn it counterclockwise to remove the Large Object Trap. Turn it upside-down and gently tap it on a flat surface to dislodge debris, and flush the Micro Filter under running water. To reinstall, return the fine filter to position and turn the locking nut clockwise until locked. (Page 15)
Show all 10 questions
How much detergent should I use in my Bosch dishwasher?
With soft water, 1 tablespoon (15ml) of detergent will clean most loads, and you should never use more than 3 tablespoons (45ml). If you do not know your water hardness, start with 15ml and increase only as necessary. Using too much detergent with soft water can cause etching in glassware. (Page 10-11)
Which wash cycles support the Sanitize option?
The Sanitize option is available only with the Heavy, Auto, Normal, and Half Load wash cycles. Press the 'Sanitize' button to activate it, and the Sanitize LED will light when sanitation requirements are met. The Sanitize option is not available for Delicate Wash, Express Wash, or Rinse & Hold cycles. (Page 12)
What should I do if my dishwasher has an odor?
Common causes include food debris at the bottom of the dishwasher, food particles near the door seal, or a blocked drain hose. Clean the filters and door seal, and if odor persists, run the Normal cycle, interrupt it, place an 8oz cup of distilled white vinegar on the top rack, and then finish the cycle. Running a Rinse & Hold cycle can also prevent odor if you won't be washing dishes immediately. (Page 17)
How do I adjust the rinse aid dispenser setting?
Enter options mode by pressing On/Off, then holding the '>' button while pressing and releasing Start. On models with a display, use the '<' button to adjust between r:00 (off) and r:06 (maximum), then press Start to save. If your glasses have spots, increase the rinse aid amount; if they have streaks, decrease it. (Page 13)
What items should NOT be washed in the Bosch dishwasher?
Items not recommended for dishwasher use include acrylic, adhesive-joined pieces, bone-handled utensils, iron, pewter, brass, bronze, tin, and wood. Paper products, plastic bags, and packing materials should also never be loaded. Only wash plastic items if they are marked 'dishwasher safe.' (Page 6)
Hi! I'm your AI assistant for the Bosch Ascenta Models. Ask me anything about setup, troubleshooting, maintenance, or features — I'll answer using the official manual.
Suggestions
AI answers may contain errors. Verify with the original manual for safety-critical questions.