Whirlpool French Door Refrigerator

What are the recommended temperature settings for my Whirlpool French Door Refrigerator?

The recommended temperature settings are 37°F (3°C) for the refrigerator compartment and 0°F (-18°C) for the freezer compartment. Your refrigerator's temperature controls are factory preset to these settings upon installation, but you can verify and adjust them as needed using the touch pad controls.

How do I adjust the temperature in my Whirlpool refrigerator?

Press the (+) or (-) touch pad to display the current temperature set point, then press the (+) or (-) touch pads until your desired temperature is displayed. Do not adjust either temperature control more than one setting at a time, and wait 24 hours between adjustments to allow the temperature to stabilize.

How do I turn off the cooling in my Whirlpool French Door Refrigerator?

Press and hold the Cooling On/Off touch pad for 3 seconds to turn off cooling for both compartments. Press the button again for 3 seconds to turn the cooling back on.

How do I reset the water filter light on my Whirlpool refrigerator?

After replacing the water filter, press and hold the Filter Reset button for 3 seconds until the Order or Replace light turns off. This resets the filter indicator on your control center.

How do I lock and unlock the ice and water dispenser?

Press and hold the Lock/Unlock touch pad for 3 seconds to lock the dispenser; the indicator light will illuminate when locked. Press and hold the Lock/Unlock touch pad again for 3 seconds to unlock the dispenser, and the indicator light will turn off.

What should I do if my refrigerator door has been left open too long?

The Door Alarm feature will sound a chime every few seconds when the refrigerator door has been left open for 5 continuous minutes. You can press the Door Alarm touch pad to turn this feature on or off; the indicator light will be lit when the Door Alarm feature is on.